The 'Unofficial' Tacx Forum

When you press about the app, what does it say? This looks like the mobile training app, not TDA.

Here is how you do a screenshot on the Mac:

https://support.apple.com/en-us/HT201361

Is the second one TDA?

Using a brand new MacBook Pro (2021) running Monterey 12.3.1. The odd thing is I had it unplugged all last night. When I plugged it in this morning - the bluetooth light isn't coming on. However it does show as connected by bluetooth on the TDA. I have some extender dongles coming this afternoon. I...

I tried the TDA today. Also no joy. I did hear from my bike shop it might be that that Bluetooth range isn't great - so have bought a range extender. See if that might help. I spent a good two hours on the phone with Garmin today and they are also at a loss. At this point they have escalated it up ...

My Neo 2t and Sram eTap just won't work together. I have adjusted gears and they work fine with rear wheel in real road use and on a test bench. But when I set my bike on Neo 2t gears are off, except maybe one. I just talked with a friend of mine who has same problems with Shimano gears. Then again...

Have you realised that Neo2T only accepts one bluetooth connection at a time. I could not get the brake working until I switched bluetooth off of my iPhone, with which it worked just fine. Yes, I am aware that a single pairing is generally the limit for BT (unless you have a multi-channel device, w...

Don't worry about deleting or moving your first message. If you have anyway to try your trainer using TDA on either a Windows PC or an Apple Mac, I would do that. You can download, install TDA, and do a demo ride for free without actually buying a subscription. This would be a good test to determine...

I am a little confused by your terminology. You refer to not having any success using TDA with various mobile devices, but TDA (Tacx Desktop App) only runs on a desktop computer (either the Windows version or the the Apple MAC version). The Tacx Training App (TTA) is for Android or Apple mobile devi...

Also might be that the EDGE was connected too creating some kind of conflict. Even though the EDGE never lost connection. Not sure which model Edge you have, but there could be problem if you are attempting a simultaneous Bluetooth connection between the trainer and your Edge. I have an older Edge ...

Hi guys, am new here and thanks for accepting me. I have a Flux 2 and today I tested it with the mobile app Tacx. Every 1-2 minutes pause was kicking in and was not able to resume. Had to close app, resume workout and loop this several times. Any advice or idea? Thanks A Have you checked to be sure...

Hello Michael I ride with a Tacx NEO. You can install FEC trainers which use an ant interface. When you do some investigation in the xml configuration files you will be able to place custom meters (color/size where you want on the screen. I will make a screen shot of my video display working with a...

Neo 2 is skipping clunking every pedal stroke , I replaced the bearing checked the bike and removed it . when I spin the fly wheel with out the bike on the trainer it is still occurring so I am assuming its something to do with the trainer. Any suggestions If you are confident that this is not a me...

The Tacx RLV's (uncoded and coded) work perfectly in Golden Cheetah. Although it requires some time and effort to get things going it works OK with most trainers. Even better than the original TTS4 software as you can set more parameters to get a realistic riding feeling. f.e. Cw value, frontal sur...

Have you contacted Tacx/Garmin Support?

How does the bearing feel? If it is rough, it might cause overheating. It might be relatively easy to replace.

I never came across any VR terrains other than the ones issued by Tacx. I believe there were optional Velodrome and Extreme Mountainbike VR terrains also sold by Tacx. Did you look at this page on another part of this website (it has a picture of the Extreme Mountainbike map). https://lunicus.org/fo...

There is no speed being seen/ showing when I try to calibrate. Yes I’m pedaling fast enough to go at least 16 mph. Then calibration times out. Speed cadence and power all work well doing a workout or VR. Are you sure you have a Fortius brake and not an Imagic/Flow? When you calibrate the Fortius, y...

What if the brake shows zero miles an hour while calibration, but works when running a workout or vr? Don't really understand the question. When you start calibration on the Fortius, it should self-motor after briefing touching the pedal. It will run for a few seconds by itself and then roll to a s...

What version of TTS3 are you trying to install? As I recall, the last full install disc version was 3.5. Earlier versions might have a problem installing on Windows 10. I just don't know. You are dealing with software that is quite old now (probably 10 years). And you should be aware that there may ...

Hello, I have a copy of TTS 3.0 on DVD. This software is installed on a defective computer with Windows 7. I want to re-install this software on another computer with Windows 10. I have the license number in the DVD package and the license file from the old PC with Windows 7. Could you help me for ...

Hi again. Ok. My fault. Cable between unit and motorbrake was not wired properly. :-( It works. Almost. Catalyst is fine and RLV as well. But virtual reality does not work. It is loaded but when I start pedalling nothing happens. Strange. Maybe something wrong in settings? Thnks for suggestions I h...

Hi all. I moved further. Installed VMW Player then Win XP. Then TTS 2 plus upgrades. Well and it looks it works. Almost. The software doesn t communicate with my HW: motorbrake T1941 and head ubs unit T1932. I do not know at all how to test the hw. Any suggestions? Thanks Do any of the LED's on the...

Thanks Michael Corn. I had seen that post and tried the suggested actions to no avail. However i think i have solved my issue. I had noticed that my date and time were no longer accurate after the computer was turned off and back on so i replaced the cmos battery on the board and reset the time and...

After having my computer idle for a long time I reconnected everything it seemed to be running fine however after about 30 minutes of riding an RLV the video keeps playing however all the feedback stops. The video keeps playing but all the parameters are frozen. Heart rate, slope, time, distance et...

I have not, but the software I'm using shouldn't matter as it just won't calibrate at all. It says it's connected but the MPH screen never moves. Always stuck at 0.0MPH. I would still try other software just to rule out it being a Zwift-specific problem. You can try TDA or one of the Garmin/Tacx mo...

As I replied earlier, getting your Flow to work with ANT is a challenge and requires a fair amount of technical knowledge and skill. Please look at the links above in this thread. Here is a link to the FortiusANT manual. You can judge whether you want to go through this before you buy a new handleba...

That is definitely odd. And it is suspicious that it happened the same time as a firmware update. Have you checked the power supply to confirm it is working? You need a small DC meter to see it is still working at the correct voltage.

My smart trainer is all of a sudden not working. It connects to Zwift but when I go to do a ride it does not move on the screen. I've tried to calibrate it but that is not working as well. Same as Zwift. It shows up as connected but when I try calibration, I get the MPH screen but it's not moving a...

I have not had anything like this happen in recent years. I would definitely contact Garmin Support and send the log files. It could be a Tacx server issue. It could also be a computer resource issue. If this is recurring, I would try using Microsoft resource monitor to record CPU, memory, and video...

Hi, I am using TTS 4.23.0. If I want to update to 4.32.1 is it sufficient to use the 4.23.1 patch file from the website ? Or do I need to run the 4.23.1 full and after that the 4.23.1 patch ?? To the best of my knowledge there is no 4.23.1 full installer. To get to 4.23.1, you must first install 4....

TTS was a bit of mess with video playback and jumping between VP1 and VP2. And this was compounded by users installing various codec packs, often for use with other applications. Tacx finally solved all of this by shutting down TTS.