Hello one question,
I use a Satori Smart Trainer. How is the cadence determined?
I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!
Tip?
Greetings Hans-Peter
Satori with ANT+ external cadence sensor
- mcorn
- Directeurs Sportifs
- Posts: 903
- Joined: Thu Mar 21, 2019 12:56 pm
- Location: Bellingham, Washington, USA
- USER_FLAG:
You need to turn off the cadence signal from the Satori. You can't have two cadence signal sources at the same time. You should be able to unclick Satori cadence on the Device Manager page.HP1970 wrote: ↑Tue May 25, 2021 6:07 pm Hello one question,
I use a Satori Smart Trainer. How is the cadence determined?
I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!
Tip?
Greetings Hans-Peter
Michael Corn
Bellingham, Washington, USA
Bellingham, Washington, USA
Hello Michael,mcorn wrote: ↑Wed May 26, 2021 2:40 pmYou need to turn off the cadence signal from the Satori. You can't have two cadence signal sources at the same time. You should be able to unclick Satori cadence on the Device Manager page.HP1970 wrote: ↑Tue May 25, 2021 6:07 pm Hello one question,
I use a Satori Smart Trainer. How is the cadence determined?
I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!
Tip?
Greetings Hans-Peter
thanks for the Tip, but i do that. it doesn´t runs. the speed had no function......
- mcorn
- Directeurs Sportifs
- Posts: 903
- Joined: Thu Mar 21, 2019 12:56 pm
- Location: Bellingham, Washington, USA
- USER_FLAG:
I am guessing you turned off speed rather than cadence. Cadence is a circular symbol. Speed is a dial with arrow symbol. Below is a screenshot with cadence turned off. After you turn off cadence, you have to turn device search on by hitting the "search" button in the upper right of the Device Manager screen. Your separate cadence sensor should appear. Be sure it is active and sending out a signal by turning your crank.
Michael Corn
Bellingham, Washington, USA
Bellingham, Washington, USA